auto-create-rfd-template

Enables auto creation of an RF Domain:

when tokens are used to select the RF Domain to apply to devices matching the adoption criteria, and
the token-specified RF Domain does not exist.

During device adoption, if the token-specified RF Domain (configured using the ‘adopt‘ rule) is not found, the system auto creates a new RF Domain based on an existing RF Domain template specified using this command. This option is disabled by default.

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

auto-create-rfd-template <RF-DOMAIN-NAME>

Parameters

auto-create-rfd-template <RF-DOMAIN-NAME>


auto-create-rfd-template <RF-DOMAIN-NAME>	Auto creates a new RF Domain based on an existing RF Domain template <RF-DOMAIN-NAME> – Specify the RF Domain name (should be existing and configured). The new RF Domain created is saved with the token name specified in the ‘adopt‘ command. Note: For more information on configuring tokens, see Usage Guidelines: Built-in Tokens & Alias.

Examples

The following example configures an adopt rule for adopting any AP7532 and applying an RF Domain matching the token “$MODEL[1:5]” to the adopted AP:

nx9500-6C8809(config-auto-provisioning-policy-test)#adopt ap7532 precedence 20 
rf-domain $MODEL[1:5] any

nx9500-6C8809(config-auto-provisioning-policy-test)#show context
auto-provisioning-policy test
 adopt ap7532 precedence 20 rf-domain $MODEL[1:5] any
nx9500-6C8809(config-auto-provisioning-policy-test)#

The following example enables auto creation of an RF Domain using an existing RF Domain ‘rfd-AP‘ as template:

RF Domain name “AP-75”: Applicable to any AP 7532

nx9500-6C8809(config-auto-provisioning-policy-test)#auto-create-rfd-template AP-75

nx9500-6C8809(config-auto-provisioning-policy-test)#show context
auto-provisioning-policy test
 adopt ap7532 precedence 20 any
 auto-create-rfd-template rfd-AP
nx9500-6C8809(config-auto-provisioning-policy-test)#

As per the above configurations, when an AP 7532 comes up for first-time adoption, the system:
- Checks for an RF Domain matching the options provided in the ‘adopt‘ rule, and if not found
- auto creates the RF Domain only if:
  - A token is specified in the ‘adopt‘ rule. For example, $MODEL[1:5], and
  - the ‘auto-create-rfd-template‘ option is configured
- Uses the ‘RF Domain‘ specified in the auto-create-rfd-template command as a template. Therefore, the specified RF Domain should be existing and configured.
- Applies the new RF Domain to the AP.

Related Commands


no	Disables auto creation of an RF Domain